From e2e7f6e29c99a1c6afc0e0aa4b9ea80302d28720 Mon Sep 17 00:00:00 2001 From: Daniel Golle Date: Tue, 4 Jan 2022 12:07:46 +0000 Subject: [PATCH 3/3] net: ethernet: mtk_eth_soc: implement Clause 45 MDIO access Implement read and write access to IEEE 802.3 Clause 45 Ethernet phy registers while making use of new mdiobus_c45_regad and mdiobus_c45_devad helpers. Tested on the Ubiquiti UniFi 6 LR access point featuring MediaTek MT7622BV WiSoC with Aquantia AQR112C. Signed-off-by: Daniel Golle Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 70 +++++++++++++++++---- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 3 + 2 files changed, 60 insertions(+), 13 deletions(-) --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -196,13 +196,35 @@ static int _mtk_mdio_write(struct mtk_et if (ret < 0) return ret; - mtk_w32(eth, PHY_IAC_ACCESS | - PHY_IAC_START_C22 | - PHY_IAC_CMD_WRITE | - PHY_IAC_REG(phy_reg) | - PHY_IAC_ADDR(phy_addr) | - PHY_IAC_DATA(write_data), - MTK_PHY_IAC); + if (phy_reg & MII_ADDR_C45) { + mtk_w32(eth, PHY_IAC_ACCESS | + PHY_IAC_START_C45 | + PHY_IAC_CMD_C45_ADDR | + PHY_IAC_REG(mdiobus_c45_devad(phy_reg)) | + PHY_IAC_ADDR(phy_addr) | + PHY_IAC_DATA(mdiobus_c45_regad(phy_reg)), + MTK_PHY_IAC); + + ret = mtk_mdio_busy_wait(eth); + if (ret < 0) + return ret; + + mtk_w32(eth, PHY_IAC_ACCESS | + PHY_IAC_START_C45 | + PHY_IAC_CMD_WRITE | + PHY_IAC_REG(mdiobus_c45_devad(phy_reg)) | + PHY_IAC_ADDR(phy_addr) | + PHY_IAC_DATA(write_data), + MTK_PHY_IAC); + } else { + mtk_w32(eth, PHY_IAC_ACCESS | + PHY_IAC_START_C22 | + PHY_IAC_CMD_WRITE | + PHY_IAC_REG(phy_reg) | + PHY_IAC_ADDR(phy_addr) | + PHY_IAC_DATA(write_data), + MTK_PHY_IAC); + } ret = mtk_mdio_busy_wait(eth); if (ret < 0) @@ -219,12 +241,33 @@ static int _mtk_mdio_read(struct mtk_eth if (ret < 0) return ret; - mtk_w32(eth, PHY_IAC_ACCESS | - PHY_IAC_START_C22 | - PHY_IAC_CMD_C22_READ | - PHY_IAC_REG(phy_reg) | - PHY_IAC_ADDR(phy_addr), - MTK_PHY_IAC); + if (phy_reg & MII_ADDR_C45) { + mtk_w32(eth, PHY_IAC_ACCESS | + PHY_IAC_START_C45 | + PHY_IAC_CMD_C45_ADDR | + PHY_IAC_REG(mdiobus_c45_devad(phy_reg)) | + PHY_IAC_ADDR(phy_addr) | + PHY_IAC_DATA(mdiobus_c45_regad(phy_reg)), + MTK_PHY_IAC); + + ret = mtk_mdio_busy_wait(eth); + if (ret < 0) + return ret; + + mtk_w32(eth, PHY_IAC_ACCESS | + PHY_IAC_START_C45 | + PHY_IAC_CMD_C45_READ | + PHY_IAC_REG(mdiobus_c45_devad(phy_reg)) | + PHY_IAC_ADDR(phy_addr), + MTK_PHY_IAC); + } else { + mtk_w32(eth, PHY_IAC_ACCESS | + PHY_IAC_START_C22 | + PHY_IAC_CMD_C22_READ | + PHY_IAC_REG(phy_reg) | + PHY_IAC_ADDR(phy_addr), + MTK_PHY_IAC); + } ret = mtk_mdio_busy_wait(eth); if (ret < 0) @@ -621,6 +664,7 @@ static int mtk_mdio_init(struct mtk_eth eth->mii_bus->name = "mdio"; eth->mii_bus->read = mtk_mdio_read; eth->mii_bus->write = mtk_mdio_write; + eth->mii_bus->probe_capabilities = MDIOBUS_C22_C45; eth->mii_bus->priv = eth; eth->mii_bus->parent = eth->dev; --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h @@ -327,9 +327,12 @@ #define PHY_IAC_ADDR_MASK GENMASK(24, 20) #define PHY_IAC_ADDR(x) FIELD_PREP(PHY_IAC_ADDR_MASK, (x)) #define PHY_IAC_CMD_MASK GENMASK(19, 18) +#define PHY_IAC_CMD_C45_ADDR FIELD_PREP(PHY_IAC_CMD_MASK, 0) #define PHY_IAC_CMD_WRITE FIELD_PREP(PHY_IAC_CMD_MASK, 1) #define PHY_IAC_CMD_C22_READ FIELD_PREP(PHY_IAC_CMD_MASK, 2) +#define PHY_IAC_CMD_C45_READ FIELD_PREP(PHY_IAC_CMD_MASK, 3) #define PHY_IAC_START_MASK GENMASK(17, 16) +#define PHY_IAC_START_C45 FIELD_PREP(PHY_IAC_START_MASK, 0) #define PHY_IAC_START_C22 FIELD_PREP(PHY_IAC_START_MASK, 1) #define PHY_IAC_DATA_MASK GENMASK(15, 0) #define PHY_IAC_DATA(x) FIELD_PREP(PHY_IAC_DATA_MASK, (x))